Break oily water emulsion during petroleum enhancing production processes using green approach for the synthesis of SnCuO@FeO nanocomposite from microorganisms.

The aim of this work was to synthesize a green nanoparticle SnCuO@FeO nanocomposite core-shell to break oily water emulsions during petroleum-enhancing production processes as an alternative to chemical and physical processes. In this study, eight bacterial isolates (MHB1-MHB8) have been isolated from tree leaves, giant reeds, and soil samples. The investigation involved testing bacterial isolates for their ability to make FeO nanoparticles and choosing the best producers. The selected isolate (MHB5) was identified by amplification and sequencing of the 16S rRNA gene as Bacillus paramycoides strain OQ878685. MHB5 produced the FeO nanoparticles with the smallest particle size (78.7 nm) using DLS. XRD, FTIR, and TEM were used to characterize the biosynthesized nanoparticles. The jar experiment used SnCuO@FeO with different ratios of Sn to CuO (1:1, 2:1, and 3:1) to study the effect of oil concentration, retention time, and temperature. The most effective performance was observed with a 1:1 ratio of Sn to CuO, achieving an 85% separation efficiency at a concentration of 5 mg/L, for a duration of 5 min, and at a temperature of 373 K. Analysis using kinetic models indicates that the adsorption process can be accurately described by both the pseudo-first-order and pseudo-second-order models. This suggests that the adsorption mechanism likely involves a combination of film diffusion and intraparticle diffusion. Regarding the adsorption isotherm, the Langmuir model provides a strong fit for the data, while the D-R model indicates that physical interactions primarily govern the adsorption mechanism. Thermodynamic analysis reveals a ∆H value of 18.62 kJ/mol, indicating an exothermic adsorption process. This suggests that the adsorption is a favorable process, as energy is released during the process. Finally, the synthesized green SnCuO@FeO nanocomposite has potential for use in advanced applications in the oil and gas industry to help the industry meet regulatory compliance, lower operation costs, reduce environmental impact, and enhance production efficiency.

Spatial response of water level and quality shows more significant heterogeneity during dry seasons in large river-connected lakes.

The spatial response mechanism of hydrology and water quality of large river-connected lakes is very complicated. In this study, we developed a spatial response analysis method that couples wavelet correlation analysis (WTC) with self-organizing maps (SOM), revealing the spatial response and variation of water level and water quality in Poyang Lake, China's largest river-connected lake, over the past decade. The results show that: (1) there was significant spatial heterogeneity in water level and quality during the dry seasons (2010-2018) compared to other hydrological stages. (2) We identified a more pronounced difference in response of water level and quality between northern and southern parts of Poyang Lake. As the distance increases from the northern lake outlet, the impact of rising water levels on water quality deterioration intensified during the dry seasons. (3) The complex spatial heterogeneity of water level and quality response in the dry seasons is primarily influenced by water level fluctuations from the northern region and the cumulative pollutant entering the lake from the south, which particularly leads to the reversal of the response in the central area of Poyang Lake. The results of this study can contribute to scientific decision-making regarding water environment zoning management in large river-connected lakes amidst complex environment conditions.

An Evaluation of the Reliability of the Pictorial Scale of Perceived Water Competence and Its Relationship With Actual Water Competence.

In its recent development, the Pictorial Scale of Perceived Water Competence (PSPWC) showed good face and construct validity. However, additional reliability and validity research is needed, including test-retest reliability and a demonstration of the relationship between PSPWEC test scores and actual water competence. Toward that aim, we administered the PSPWC to 124 children, aged 5-8 years. We repeated this test administration after one week for a subset of 55 children to determine its test-retest reliability, and the remaining 69 children also performed the fully aligned Actual Aquatic Skills Test (AAST) in an indoor swimming pool to provide data for our investigation of the relationship between PSPWC scores and actual water competence. We found good test-retest reliability, both at the global level (ICC = 0.81, n = 55) and at the level of individual skills (Weighted kappa coefficients from 0.58 to 0.90), with no significant differences between these two test scores. We also found a moderate positive relationship between PSPWC and AAST total scores (r = .64, n = 69), with no significant difference between total scores of actual and perceived water competencies. Children overestimated their competence in three specific skills: the back star, swimming on the front, and diving in deep water. While these results underline specific situations in which children's higher self-perceptions of their water competence are a risk factor for their water safety, these data confirm that the PSPWC is reliable for measuring children's perceived competencies in aquatic education and drowning prevention, and there is further support for its validity through a moderate correlation with actual water competencies.

Should Transformation Products Change the Way We Manage Chemicals?

When chemical pollutants enter the environment, they can undergo diverse transformation processes, forming a wide range of transformation products (TPs), some of them benign and others more harmful than their precursors. To date, the majority of TPs remain largely unrecognized and unregulated, particularly as TPs are generally not part of routine chemical risk or hazard assessment. Since many TPs formed from oxidative processes are more polar than their precursors, they may be especially relevant in the context of persistent, mobile, and toxic (PMT) and very persistent and very mobile (vPvM) substances, which are two new hazard classes that have recently been established on a European level. We highlight herein that as a result, TPs deserve more attention in research, chemicals regulation, and chemicals management. This perspective summarizes the main challenges preventing a better integration of TPs in these areas: (1) the lack of reliable high-throughput TP identification methods, (2) uncertainties in TP prediction, (3) inadequately considered TP formation during (advanced) water treatment, and (4) insufficient integration and harmonization of TPs in most regulatory frameworks. A way forward to tackle these challenges and integrate TPs into chemical management is proposed.

Genetic diversity of KPC-2-producing Klebsiella pneumoniae complex from aquatic ecosystems.

During the COVID-19 pandemic, the occurrence of carbapenem-resistant Klebsiella pneumoniae increased in human clinical settings worldwide. Impacted by this increase, international high-risk clones harboring carbapenemase-encoding genes have been circulating in different sources, including the environment. The blaKPC gene is the most commonly disseminated carbapenemase-encoding gene worldwide, whose transmission is carried out by different mobile genetic elements. In this study, blaKPC-2-positive Klebsiella pneumoniae complex strains were isolated from different anthropogenically affected aquatic ecosystems and characterized using phenotypic, molecular, and genomic methods. K. pneumoniae complex strains exhibited multidrug-resistant and extensively drug-resistant profiles, spotlighting the resistance to carbapenems, ceftazidime-avibactam, colistin, and tigecycline, which are recognized as last-line antimicrobial treatment options. Molecular analysis showed the presence of several antimicrobial resistance, virulence, and metal tolerance genes. In-depth analysis showed that the blaKPC-2 gene was associated with three different Tn4401 isoforms (i.e., Tn4401a, Tn4401b, and Tn4401i) and NTEKPC elements. Different plasmid replicons were detected and a conjugative IncN-pST15 plasmid harboring the blaKPC-2 gene associated with Tn4401i was highlighted. K. pneumoniae complex strains belonging to international high-risk (e.g., ST11 and ST340) and unusual clones (e.g., ST323, ST526, and ST4216) previously linked to clinical settings. In this context, some clones were reported for the first time in the environmental sector. Therefore, these findings evidence the occurrence of carbapenemase-producing K. pneumoniae complex strains in aquatic ecosystems and contribute to the monitoring of carbapenem resistance worldwide.

Organic Supplementation of Vaccinium corymbosum Micropropagation Media.

The best Vaccinium corymbosum plant growth under in vitro conditions can be achieved by using the right composition and pH of the medium. For the initial phase of in vitro culture, a combination of cytokinins-mostly zeatin-can usually be used. Organic supplementation of the medium enables the use of a replacement for the expensive natural cytokinin used in micropropagation of highbush blueberry. This chapter describes the experiments with silicon Hydroplus™ Actisil (Si), coconut water (CW), and different pH (5.0; 5.5, and 6.0) as a stress factor. The addition of 200 mg dm-3 silicon solution and 15% coconut water strongly stimulated highbush blueberry plant growth in vitro. Moreover, silicon solution benefits the negative effects of higher pH of the medium used for micropropagation of V. corymbosum. Maximum vegetative development of blueberry explants was obtained at pH 5.

Using Magnetic Fields to Enhance the Seed Germination, Growth, and Yield of Plants.

Geomagnetic field (GMF) protects living organisms on the Earth from the radiation coming from space along with other environmental factors during evolution, and it has affected the growth and development of plants. Many researchers have always been interested in investigating these effects in different aspects. In this chapter, we focus on the methods of using different types of magnetic fields (MFs) to investigate the dimensions of their biological effects on plants. The aim is to increase seed germination, growth characters, and yield of plants using the following methods: (1) Using MFs lower than GMF to study effects of GMF on the growth and yield of plants. (2) Using reversed magnetic fields (RMFs) lower than GMF to study its effects on the growth and development of plants during evolution. (3) Using static magnetic fields (SMFs) higher than GMF and reversed SMFs to study effects of the south (S) and north (N) magnetic pole on plants. (4) Using electromagnetic fields (EMFs) to increase and accelerate seed germination, growth, and yield of plants, and establish the status of plants against other environmental stresses. (5) Using magnetized water (MW) to improve plant seed germination, growth, and yield. (6) Using high gradient magnetic field (HGMF) to study magneto-tropism in plants. In this chapter, we recommend application of various types of MFs to study their biological effects on plants to improve crop production.

Anodic Reactions in Alkaline Hybrid Water Electrolyzers: Activity versus Selectivity.

Affordable and abundant sources of green hydrogen can give a large impetus to the Energy Transition. While conventional water electrolysis has positioned itself as a prospective candidate for this purpose, it lacks cost competitiveness. Hybrid water electrolysis (HWE) has been praised for its ability to address the issues of conventional water electrolysis due to its decreased energy requirements and its ability to generate value-added products, among other advantages. In this perspective, we discuss the challenges related to the applicability of HWE, using the glycerol oxidation reaction as an example, and we identify pitfalls often found in the literature. Reported catalysts, especially those based on abundant materials, suffer from a severe selectivity-activity tradeoff, hampering their industrial applicability due to large costs associated with product separation and purification. Additionally, testing electrocatalysts under conditions that are relevant for their applications is encouraged, yet these conditions are largely unknown, as in-depth knowledge of the catalytic mechanisms is largely missing. Lastly, an opportunity to increase the amount of interdisciplinary research concerning both the engineering requirements and financial performance of HWE is discussed. Increased focus on these objectives may boost the development of HWE on an industrial scale.

Ambiguous Faces of Water-Based Inclusion Compounds: L4(4)8(8) Intercalato-Clathrate Hydrate of Pt(II) Complex.

Clathrate hydrates are among the most intensively studied H-bond inclusion compounds. Despite the broad definition for this class of compounds, their meaning commonly refers to closed polyhedral nanocages that encapsulate small guest molecules. On the other hand, larger solutes enforce another type of encapsulation because of the solute size effect. Herein, we report a series of structures containing various molecules encapsulated by intercalated water layers constructed of polycyclic moieties of L4(4)8(8) topology. We parametrized the corrugation of individual layers and characterized interactions governing their formation. We suggested which could be categorized as two-dimensional clathrates based on the character of intra-layer interactions and effects observed between entrapped molecules and water-based intercalators.

Geochemistry and the optics of geospatial analysis as a preposition of water quality on a macroscale.

The water treatment depends exclusively on the identification of residues containing toxic chemical elements accumulated in NPs (nanoparticles), and ultrafine particles sourced from waste piles located at old, abandoned sulfuric acid factories containing phosphogypsum requires global attention. The general objective of this study is to quantify and analyze the hazardous chemical elements present in the leachate of waste from deactivated sulfuric acid factories, coupled in NPs and ultrafine particles, in the port region of the city of Imbituba, Santa Catarina, Brazil. Samples were collected in 2020, 2021, and 2022. Corresponding images from the Sentinel-3B OLCI satellite, taken in the same general vicinity, detected the levels of absorption coefficient of Detritus and Gelbstoff (ADG443_NN) in 443 m-1, chlorophyll-a (CHL_NN (m-3)), and total suspended matter (TSM_NN (g m-3) at 72 points on the marine coast of the port region. The results of inductively coupled plasma atomic-emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) demonstrate that the leaching occurring in waste piles at the port area of Imbituba was the likely source of hazardous chemical elements (e.g., Mg, Sr, Nd, and Pr) in the environment. These leachates were formed due to the presence of coal pyrite and Fe-acid sulfates in said waste piles. The mobility of hazardous chemical elements potentiates changes in the marine ecosystem, in relation to ADG443_NN (m-1), CHL_NN (m-3), and TSM NN (g m-3), with values greater than 20 g m-3 found in 2021 and 2022. This indicated changes in the natural conditions of the marine ecosystem up to 30 km from the coast in the Atlantic Ocean, justifying public initiatives for water treatment on a global scale.

Suitability of novel 3D-printed and coated vessels for water calorimetry.

BACKGROUND: In water calorimetry, absolute dose to water is determined by measuring radiation-induced temperature rises. In conventional water calorimeters, temperature detectors are housed in handmade glass vessels that are filled with high-purity water, thus mitigating radiation-induced exo/endothermic chemical reactions of impurities that would otherwise introduce additional heat gain/loss, known as heat defect. Being hand-crafted, these glass vessels may suffer from imperfections, have shape and design constraints, are often backordered, and can be prohibitively expensive. PURPOSE: The purpose of this work is to determine suitability of 3D-printed plastic vessels that are further coated for use in water calorimetry applications, and to study their stability and characterize their associated heat defect correction factor ( k hd ) ${k_{{\mathrm{hd}}}})$ . This novel vessel production technique would allow for cost-effective rapid construction of vessels that can be produced with high accuracy and designs that are simply not practical with current glass vessel construction techniques. This in turn enables water calorimetry applications in many novel radiation delivery modalities, which may include spherical vessels in GammaKnife ICON water calorimetry as an example. METHODS: Eight vessels were 3D-printed using Accura ClearVue in an SLA 3D-printer. Two vessels were coated with Parylene C and four were coated with Parylene N. The water calorimetry preparation procedures followed for these vessels was identical to that of our traditional glass-vessels (i.e., same cleaning procedures, same high purity water, and same saturation procedures with high purity hydrogen gas). The performance of each vessel was characterized using our in-house built water calorimeter in an Elekta Versa using both 6 MV flattening filter-free (FFF) and 18 MV beams. The stability of the coating as function of time and accumulated dose was evaluated through repeated measurements. k hd ${k_{{\mathrm{hd}}}}\;$ of each vessel was determined through cross-comparisons against an Exradin A1SL ionization chamber with direction calibration link to Canada's primary standard laboratory. RESULTS: k HD ${k_{{\mathrm{HD}}}}\;$ of the two uncoated vessels differed by 2.8% under a 6 MV FFF beam. Vessels coated with Parylenes resulted in a stable and reproducible heat defect for both energies. An overall k hd ${k_{{\mathrm{hd}}}}$ of 1.001 ± 0.010 and 1.005 ± 0.010 were obtained for Parylene N and Parylene C coated vessels respectively. All Parylene coated vessels showed agreement, within the established uncertainties, to the zero-heat defect observed in a hydrogen-saturated glass vessel system. An additional long-term study (17 days) of a Parylene N vessel showed no change in response with accumulated dose and time. Electron microscopy images of a Parylene N coated vessel showed a uniform intact coating after repeated irradiations. CONCLUSIONS: An uncoated 3D-printed vessel is not viable for water calorimetry because it exhibits an unstable vessel-dependent heat defect. However, applying a Parylene coating stabilizes the heat defect, suggesting that coated 3D-printed vessels may be suitable for use in water calorimetry. This method facilitates the creation of intricate vessel shapes, which can be efficiently manufactured using 3D printing.

The axial skeleton of Tiktaalik roseae.

The axial columns of the earliest limbed vertebrates show distinct patterns of regionalization as compared to early tetrapodomorphs. Included among their novel features are sacral ribs, which provide linkage between the vertebral column and pelvis, contributing to body support and propulsion by the hindlimb. Data on the axial skeletons of the closest relatives of limbed vertebrates are sparce, with key features of specimens potentially covered by matrix. Therefore, it is unclear in what sequence and under what functional context specializations in the axial skeletons of tetrapods arose. Here, we describe the axial skeleton of the elpistostegalian Tiktaalik roseae and show that transformations to the axial column for head mobility, body support, and pelvic fin buttressing evolved in finned vertebrates prior to the origin of limbs. No atlas-axis complex is observed; however, an independent basioccipital-exoccipital complex suggests increased mobility at the occipital vertebral junction. While the construction of vertebrae in Tiktaalik is similar to early tetrapodomorphs, its ribs possess a specialized sacral domain. Sacral ribs are expanded and ventrally curved, indicating likely attachment to the expanded iliac blade of the pelvis by ligamentous connection. Thus, the origin of novel rib types preceded major alterations to trunk vertebrae, and linkage between pelvic fins and axial column preceded the origin of limbs. These data reveal an unexpected combination of post-cranial skeletal characters, informing hypotheses of body posture and movement in the closest relatives of limbed vertebrates.

Oxidation of branched chain amino acids by HOCl: Kinetics and mechanism.

The kinetics of the chlorination of leucine, isoleucine, and valine (BCAAs) was studied in excess HOCl by stopped-flow and spectrophotometric methods (25 ◦C, I = 1.0 M NaClO4). The intermediates and products were identified and monitored by 1H NMR spectroscopy. It was established that these reactions are fully analogous and proceed according to distinct mechanisms under alkaline and neutral conditions. At high pH, the formation and subsequent rate determining decomposition of N-monochloroamino acid control the process. The decomposition occurs via competing pH-independent and OH--assisted reaction paths and the sequence of chlorination, dichlorination and decarboxylation steps leads to the formation of N-chloroimines and their carbanionic forms, which are in fast acid - base equilibria. The dechlorination of the carbanions yields nitriles as the main products. The hydration of the N-chloro imines produces chloramine and aldehydes which are involved in further oxidation reactions with HOCl. The formation of chloroform and chloroacetaldehyde was confirmed in each system. At pH 7.0, the N-chloro derivatives of BCAAs form immediately and are converted into the corresponding N,N-dichloro species within a few seconds after mixing the reactants. In this reaction, the reactive form of the oxidant is Cl2O. The first-order decomposition of the dichloroamino acids occurs on stopped-flow timescale (k = 0.5 - 0.7 s-1) and yields N-chloroimines which slowly decompose with a characteristic first-order rate constant on the order of a few times 10-5 s-1. The main products are the corresponding nitriles that account for about 80% and 60% of the original amounts of amino acids under neutral and alkaline (cOH- = 5.00 × 10-2 M) conditions, respectively. Aldehydes, carboxylic acids, chloroform and NCl3 were also identified as by-products. The results unequivocally confirm that harmful chlorinated species may form from amino acids long after the chlorination step in water treatment technologies that deteriorates the quality of the finished water. ENVIRONMENTAL IMPLICATION: In source waters, amino acids account for about 75% of the total dissolved nitrogen. Therefore, it is an essential issue how the reactions of these compounds with hypochlorite ion can be controlled to avoid the formation of toxic compounds. The compounds formed from BCAAs are considered to be harmful both under alkaline and neutral conditions (chloroacetaldehyde, chloroform, nitriles). However, some of the intermediates have extended lifetime in these systems and they may also react with other components of raw water during water treatment processes.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting.

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Soil moisture decline in China's monsoon loess critical zone: More a result of land-use conversion than climate change.

Soil moisture (SM) is essential for sustaining services from Earth's critical zone, a thin-living skin spanning from the canopy to groundwater. In the Anthropocene epoch, intensive afforestation has remarkably contributed to global greening and certain service improvements, often at the cost of reduced SM. However, attributing the response of SM in deep soil to such human activities is a great challenge because of the scarcity of long-term observations. Here, we present a 37 y (1985 to 2021) analysis of SM dynamics at two scales across China's monsoon loess critical zone. Site-scale data indicate that land-use conversion from arable cropland to forest/grassland caused an 18% increase in SM deficit over 0 to 18 m depth (P < 0.01). Importantly, this SM deficit intensified over time, despite limited climate change influence. Across the Loess Plateau, SM storage in 0 to 10 m layer exhibited a significant decreasing trend from 1985 to 2021, with a turning point in 1999 when starting afforestation. Compared with SM storage before 1999, the relative contributions of climate change and afforestation to SM decline after 1999 were -8% and 108%, respectively. This emphasizes the pronounced impacts of intensifying land-use conversions as the principal catalyst of SM decline. Such a decline shifts 18% of total area into an at-risk status, mainly in the semiarid region, thereby threatening SM security. To mitigate this risk, future land management policies should acknowledge the crucial role of intensifying land-use conversions and their interplay with climate change. This is imperative to ensure SM security and sustain critical zone services.

Assessing the Effectiveness of a Multicomponent Intervention on Hand Hygiene and Well-Being in Primary Health Care Centers and Schools Lacking Functional Water Supply in Protracted Conflict Settings: Protocol for a Cluster Randomized Controlled Trial.

BACKGROUND: Hand hygiene is crucial in health care centers and schools to avoid disease transmission. Currently, little is known about hand hygiene in such facilities in protracted conflict settings. OBJECTIVE: This protocol aims to assess the effectiveness of a multicomponent hand hygiene intervention on handwashing behavior, underlying behavioral factors, and the well-being of health care workers and students. Moreover, we report our methodology and statistical analysis plan transparently. METHODS: This is a cluster randomized controlled trial with 2 parallel arms taking place in 4 countries for 1 year. In Burkina Faso and Mali, we worked in 24 primary health care centers per country, whereas in Nigeria and Palestine, we focused on 26 primary schools per country. Facilities were eligible if they were not connected to a functioning water source but were deemed accessible to the implementation partners. Moreover, health care centers were eligible if they had a maternity ward and ≥5 employees, and schools if they had ≤7000 students studying in grades 5 to 7. We used covariate-constrained randomization to assign intervention facilities that received a hardware, management and monitoring support, and behavior change. Control facilities will receive the same or improved intervention after endline data collection. To evaluate the intervention, at baseline and endline, we used a self-reported survey, structured handwashing observations, and hand-rinse samples. At follow-up, hand-rinse samples were dropped. Starting from the intervention implementation, we collected longitudinal data on hygiene-related health conditions and absenteeism. We also collected qualitative data with focus group discussions and interviews. Data were analyzed descriptively and with random effect regression models with the random effect at a cluster level. The primary outcome for health centers is the handwashing rate, defined as the number of times health care workers performed good handwashing practice with soap or alcohol-based handrub at one of the World Health Organization 5 moments for hand hygiene, divided by the number of moments for hand hygiene that presented themselves during the patient interaction within an hour of observation. For schools, the primary outcome is the number of students who washed their hands before eating. RESULTS: The baseline data collection across all countries lasted from February to June 2023. We collected data from 135 and 174 health care workers in Burkina Faso and Mali, respectively. In Nigeria, we collected data from 1300 students and in Palestine from 1127 students. The endline data collection began in February 2024. CONCLUSIONS: This is one of the first studies investigating hand hygiene in primary health care centers and schools in protracted conflict settings. With our strong study design, we expect to support local policy makers and humanitarian organizations in developing sustainable agendas for hygiene promotion. TRIAL REGISTRATION: ClinicalTrials.gov NCT05946980 (Burkina Faso and Mali); https://www.clinicaltrials.gov/study/NCT05946980 and NCT05964478 (Nigeria and Palestine); https://www.clinicaltrials.gov/study/NCT05964478. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/52959.

Morphological variations and demographic responses of the Mediterranean pond turtle Mauremys leprosa to heterogeneous aquatic habitats.

Human activities affect terrestrial and aquatic habitats leading to changes at both individual and population levels in wild animal species. In this study, we investigated the phenotype and demographics of the Mediterranean pond turtle Mauremys leprosa (Schweigger, 1812) in contrasted environments of Southern France: two peri-urban rivers receiving effluents from wastewater treatment plants (WWTP), and another one without sewage treatment plant. Our findings revealed the presence of pesticides and pharmaceuticals in the three rivers of investigation, the highest diversities and concentrations of pollutants being found in the river subsections impacted by WWTP effluents. Principal component analysis and hierarchical clustering identified three levels of habitat quality, with different pollutant concentrations, thermal conditions, nutrient, and organic matter levels. The highest turtle densities, growth rates, and body sizes were estimated in the most disturbed habitats, suggesting potential adult benefits derived from harsh environmental conditions induced by pollution and eutrophication. Conversely, juveniles were the most abundant in the least polluted habitats, suggesting adverse effects of pollution on juvenile survival or adult reproduction. This study suggests that turtles living in polluted habitats may benefit from enhanced growth and body size, at the expense of reproductive success.

Meta-analysis review for pilot and large-scale constructed wetlands: Design parameters, treatment performance, and influencing factors.

Despite their longstanding use in environmental remediation, constructed wetlands (CWs) are still topical due to their sustainable and nature-based approach. While research and review publications have grown annually by 7.5 % and 37.6 %, respectively, from 2018 to 2022, a quantitative meta-analysis employing advanced statistics and machine learning to assess CWs has not yet been conducted. Further, traditional statistics of mean ± standard deviation could not convey the extent of confidence or uncertainty in results from CW studies. This study employed a 95 % bootstrap-based confidence interval and out-of-bag Random Forest-based driver analysis on data from 55 studies, totaling 163 cases of pilot and full-scale CWs. The study recommends, with 95 % confidence, median surface hydraulic loading rates (HLR) of 0.14 [0.11, 0.17] m/d for vertical flow-CWs (VF) and 0.13 [0.07, 0.22] m/d for horizontal flow-CWs (HF), and hydraulic retention time (HRT) of 125.14 [48.0, 189.6] h for VF, 72.00 [42.00, 86.28] h for HF, as practical for new CW design. Permutation importance results indicate influent COD impacted primarily on COD removal rate at 21.58 %, followed by HLR (16.03 %), HRT (12.12 %), and substrate height (H) (10.90 %). For TN treatment, influent TN and COD were the most significant contributors at 12.89 % and 10.01 %, respectively, while H (9.76 %), HRT (9.72 %), and HLR (5.87 %) had lower impacts. Surprisingly, while HRT and H had a limited effect on COD removal, they substantially influenced TN. This study sheds light on CWs' performance, design, and control factors, guiding their operation and optimization.

Comprehensive assessment of copper's effect on marine organisms under ocean acidification and warming in the 21st century.

Copper (Cu) has sparked widespread global concern as one of the most hazardous metals to aquatic animals. Ocean acidification (OA) and warming (OW) are expected to alter copper's bioavailability based on pH and temperature-sensitive effects; research on their effects on copper on marine organisms is still in its infancy. Therefore, under representative concentration pathways (RCP) 2.6, 4.5, and 8.5, we used the multiple linear regression-water quality criteria (MLR-WQC) method to assess the effects of OA and OW on the ecological risk posed by copper in the Ocean of East China (OEC), which includes the Bohai Sea, Yellow Sea, and East China Sea. The results showed that there was a positive correlation between temperature and copper toxicity, while there was a negative correlation between pH and copper toxicity. The short-term water quality criteria (WQC) values were 1.53, 1.41, 1.30 and 1.13 µg·L-1, while the long-term WQC values were 0.58, 0.48, 0.40 and 0.29 µg·L-1 for 2020, 2099-RCP2.6, 2099-RCP4.5 and 2099-RCP8.5, respectively. Cu in the OEC poses a moderate ecological risk. Under the current copper exposure situation, strict intervention (RCP2.6) only increases the ecological risk of copper exposure by 20 %, and no intervention (RCP8.5) will increase the ecological risk of copper exposure by nearly double. The results indicate that intervention on carbon emissions can slow down the rate at which OA and OW worsen the damage copper poses to marine creatures. This study can provide valuable information for a comprehensive understanding of the combined impacts of climate change and copper on marine organisms.

Cortical parenchyma wall width regulates root metabolic cost and maize performance under suboptimal water availability.

We describe how increased root cortical parenchyma wall width (CPW) can improve tolerance to drought stress in maize by reducing the metabolic costs of soil exploration. Significant variation (1.0 to 5.0 µm) for CPW was observed in maize germplasm. The functional-structural model RootSlice predicts that increasing CPW from 2 to 4 µm is associated with ca. 15% reduction in root cortical cytoplasmic volume, respiration rate, and nitrogen content. Analysis of genotypes with contrasting CPW grown with and without water stress in the field confirms that increased CPW is correlated with ca. 32 to 42% decrease in root respiration. Under water stress in the field, increased CPW is correlated with 125% increased stomatal conductance, 325% increased leaf CO2 assimilation rate, 73 to 78% increased shoot biomass, and 92 to 108% increased yield. CPW was correlated with leaf mesophyll midrib parenchyma wall width, indicating pleiotropy. GWAS analysis identified candidate genes underlying CPW. OpenSimRoot modeling predicts that a reduction in root respiration due to increased CPW would also benefit maize growth under suboptimal nitrogen, which requires empirical testing. We propose CPW as a new phene that has utility under edaphic stress meriting further investigation.